|
|
|
 Cisco
IOS naming convention
|
|
|
a
|
| a |
APPN |
| a2 |
ATM |
| a3 |
APPN replacement |
b
|
| b |
Appletalk |
| boot |
boot image |
c
|
| c |
Comm-server/Remote Access Server (RAS) subset (SNMP, IP, Bridging,IPX, Atalk, Decnet,
FR, HDLC, PPP, X,25, ARAP, tn3270, PT,
XRemote, LAT) (non-CiscoPro) |
| c |
CommServer lite (CiscoPro) |
| c2 |
Comm-server/Remote Access Server (RAS) subset (SNMP, IP, Bridging,IPX, Atalk, Decnet,
FR, HDLC, PPP, X,25, ARAP, tn3270, PT,
XRemote, LAT) (CiscoPro) |
| c3 |
clustering |
d
|
| d |
Desktop subset (SNMP, IP, Bridging, WAN, Remote Node, Terminal
Services, IPX, Atalk, ARAP)
(11.2 - Decnet) |
| d2 |
reduced Desktop subset(SNMP, IP, IPX, ATALK, ARAP) |
| diag |
IOS based diagnostic images |
e
|
| e |
IPeXchange (no longer used in 11.3 and later)
- StarPipes DB2 Access - Enables Cisco IOS to act as a "Gateway" to
all IBM DB2 products for downstream clients/servers in 11.3T |
| eboot |
ethernet boot image for mc3810 platform |
f
|
| f |
FRAD subset (SNMP, FR, PPP, SDLLC, STUN) |
| f2 |
modified FRAD subset, EIGRP, Pcbus, Lan Mgr removed, OSPF added |
g
|
| g |
ISDN subset (SNMP, IP, Bridging, ISDN, PPP, IPX, Atalk) |
| g2 |
gatekeeper proxy, voice and video |
| g3 |
ISDN subset for c800 (IP, ISDN, FR) |
h
|
| h |
For Malibu(2910), 8021D, switch functions, IP Host |
| hdiag |
Diagnostics image for Malibu(2910) |
i (used for image names of platforms c2500 and larger)
|
| i |
IP subset (SNMP, IP, Bridging, WAN, Remote Node, Terminal Services) |
| i2 |
subset similar to IP subset for system controller image (3600) |
| i3 |
reduced IP subset with BGP/MIB, EGP/MIB, NHRP, DIRRESP removed. |
| i4 |
subset of IP (5200) |
| ipss7 |
IP subset with SS7 (2600) |
j
|
| j |
enterprise subset (formerly bpx, includes protocol translation)
*** not used until 10.3 *** |
k
|
| k |
kitchen sink (enterprise for high-end) (same as bx) (Not used after 10.3) |
| k1 |
Baseline Privacy key encryption (On 11.3 and up) |
| k2 |
high-end enterprise w/CIP2 ucode (Not used after 10.3) |
| k2 |
Triple DES (On 11.3 and up) |
| k3 |
56bit SSH encryption |
| k4 |
168bit SSH encryption |
| k5 |
Reserved for future encryption capabilities (On 11.3 and up) |
| k6 |
Reserved for future encryption capabilities (On 11.3 and up) |
| k7 |
Reserved for future encryption capabilities (On 11.3 and up) |
| k8 |
Reserved for future encryption capabilities (On 11.3 and up) |
| k9 |
Reserved for future encryption capabilities (On 11.3 and up) |
| |
l
|
| l |
IPeXchange IPX, static routing, gateway |
m
|
| m |
RMON (11.1 only) |
| m |
Catalyst 2820-kernel, parser, ATM signaling, Lane Client, bridging |
o
|
| o |
Firewall (formerly IPeXchange Net Management) |
| o2 |
Firewall (3xx0) |
| o3 |
Firewall with ssh (36x0 26x0) |
p
|
| p |
Service Provider (IP RIP/IGRP/EIGRP/OSPF/BGP, CLNS ISIS/IGRP) |
| p2 |
Service Provider w/CIP2 ucode |
| p3 |
as5200 service provider |
| p4 |
5800 (Nitro) service provider |
| p5 |
Service Provider (6400 NRP) |
| p7 |
Service Provider with PT/TARP (2600, 3640) |
q
|
| q |
Async |
| q2 |
IPeXchange Async |
r
|
| r |
IBM base option (SRB, SDLLC, STUN, DLSW, QLLC) - used with
i, in, d (See note below.) |
| r2 |
IBM variant for 1600 images |
| r3 |
IBM variant for Ardent images (3810) |
| r4 |
reduced IBM subset with BSC/MIB, BSTUN/MIB, ASPP/MIB, RSRB/MIB removed. |
s
|
| s |
source route switch (SNMP, IP, Bridging, SRB) (10.2 to 11.1) |
| s |
Additions by Platform via PLUS packs
| c1000 |
(OSPF, PIM, SMRP, NLSP, ATIP, ATAURP, FRSVC, RSVP, NAT) |
| c1005 |
(X.25, full WAN, OSPF, PIM, NLSP, SMRP, ATIP, ATAURP, FRSVC, RSVP, NAT) |
| c1600 |
(OSPF, IPMULTICAST, NHRP, NTP, NAT, RSVP, FRAME_RELAY_SVC)
AT "s" images also have: (SMRP,ATIP,AURP)
IPX "s" images also have: (NLSP,NHRP) |
| c2500 |
(NAT, RMON, IBM, MMP, VPDN/L2F) |
| c2600 |
(NAT, IBM, MMP, VPDN/L2F, VOIP and ATM) |
| c3620 |
(NAT, IBM, MMP, VPDN/L2F) In 11.3T added VOIP |
| c3640 |
(NAT, IBM, MMP, VPDN/L2F) In 11.3T added VOIP |
| c4000 |
(NAT, IBM, MMP, VPDN/L2F) |
| c4500 |
(NAT, ISL, LANE, IBM, MMP, VPDN/L2F) |
| c5200 |
(PT, v.120, managed modems, RMON, MMP, VPDN/L2F) |
| c5300 |
(MMP, VPDN, NAT, Modem Management, RMON, IBM) |
| c5rsm |
(NAT, LANE and VLANS) |
| c7000 |
(ISL, LANE, IBM, MMP, VPDN/L2F) |
| c7200 |
(NAT, ISL, IBM, MMP, VPDN/L2F) |
| rsp |
(NAT, ISL, LANE, IBM, MMP, VPDN/L2F) |
|
t
|
| t |
AIP w/ modified Ucode to connect to Teralink 1000 Data (11.2) |
| t |
Telco return (12.0) |
u
|
| u |
IP with VLAN RIP (Network Layer 3 Switching Software, rsrb, srt, srb, sr/tlb) |
| |
|
v
|
| v |
VIP and dual RSP (HSA) support |
| v2 |
Voice V2D |
| v3 |
Voice Feature Card |
| v4 |
Voice (ubr920) |
w
|
| w |
WBU Feature Sets
| i |
IISP |
| l |
LANE & PVC |
| p |
PNNI |
| v |
PVC trafffic shaping |
|
| w2 |
Cisco Advantage ED train Feature Sets
| a |
IPX, static routing, gateway |
| b |
Net Management |
| c |
FR/X25 |
| y |
Async |
|
| w3 |
Distributed Director Feature Sets |
x
|
| x |
X.25 in 11.1 and earlier releases and on c800 in 12.0T |
| x |
FR/X.25 in 11.2 (IPeXchange) |
| x |
H.323 Gatekeeper/Proxy in 11.3 and later releases for 2500, 3620, 3640, mc3810 |
y (used for image names of platforms smaller than c2500)
|
| y |
reduced IP (SNMP, IP RIP/IGRP/EIGRP, Bridging, ISDN, PPP) (C1003/4) |
| y |
reduced IP (SNMP, IP RIP/IGRP/EIGRP, Bridging, WAN - X.25) (C1005)
(11.2 - includes X.25) (c1005) |
| y |
IP variant (no Kerberos, Radius, NTP, OSPF, PIM, SMRP, NHRP...) (c1600) |
| y2 |
IP variant (SNMP, IP RIP/IGRP/EIGRP, WAN - X.25, OSPF, PIM) (C1005) |
| y2 |
IP Plus variant (no Kerberos, Radius, NTP, ...) (c1600) |
| y3 |
IP/X.31 |
| y4 |
reduced IP variant (Cable, Mibs, DHCP, EZHTTP) |
| y5 |
reduced IP variant (Cable, Mibs, DHCP, EZIP) Home Office |
| y6 |
reduced IP variant(c800) |
0-9
|
| 40 |
40 bit encryption |
| 56 |
56 bit encryption |
| 56i |
56 bit encryption with IPSEC |
Obsolete
| h |
reduced desktop subset (SNMP, IP RIP/IGRP/EIGRP, Bridging,
ISDN, PPP, IPX, Atalk) 1003/4 |
| h |
reduced desktop subset (SNMP, IP RIP/IGRP/EIGRP, Bridging,
WAN - X.25, IPX, Atalk) 1005 |
|
